Lithophanes

3D print cost calculator

A 3D print costs its filament (price per gram × grams) plus electricity, printer wear and a share for failed prints. Enter your numbers below; the defaults are a typical 100 mm lithophane in PLA, which comes to well under a dollar.

Filament
Time and power
Wear, failures, markup

Cost of this print$1.09

  • Filament$0.50
  • Electricity$0.08
  • Printer wear$0.40
  • Failed prints$0.11

Filament $20.00/kg · 0.48 kWh · $0.27 per print hour

Typical numbers to start from

InputTypical value
PLA / PETG spool$15–25 per 1 kg
Desktop FDM printer, average draw100–150 W
US average electricity (2026)about $0.17 per kWh
Wear (nozzles, belts, sheets, parts)$0.05–0.20 per hour
Failed prints5–15%

Failures are added the honest way: with a 10% failure rate you print 1.11 times on average for every good part, so the cost rises by 11%, not 10%.

How to work out a print's cost

  1. Slice the model. Your slicer shows the filament weight in grams and the print time.
  2. Enter the filament. Spool price and weight give the price per gram; multiply by the grams.
  3. Add electricity. Printer power (W) × hours ÷ 1000 = kWh, times your price per kWh.
  4. Add wear and failures. A small cost per hour for nozzles, belts and sheets, and a percentage for prints that fail.
  5. Add markup if you sell. Your time, design and packaging are not in the material cost.

Questions people ask

How do I calculate the cost of a 3D print?

Cost = filament (price per gram × grams) + electricity (watts × hours ÷ 1000 × price per kWh) + printer wear (cost per hour × hours), then add a share for failed prints. Selling price = cost × (1 + markup).

How much does it cost to 3D print a lithophane?

A 100 mm flat lithophane uses about 20–30 g of PLA and 3–5 hours: roughly $0.50 of filament and $0.10 of electricity, so under $1 including wear and the odd failure.

How much electricity does a 3D printer use?

Most desktop printers average 100–150 W while printing (the heated bed draws more at the start). A 5-hour print uses about 0.6 kWh — around 10 cents at US prices.

How much should I charge for 3D prints?

Material cost is usually a small part of the price. Many sellers charge 2–4× the material and machine cost, plus a fee for design time and packaging.

Is this calculator free?

Yes, free and instant, with nothing to sign up for. Everything is worked out in your browser.