Lithophanes

Curved lithophane maker

A curved lithophane is a photo panel bent into an arc, so it stands on its own and catches the light evenly. Upload a photo, choose the angle, check it backlit in 3D and download the STL — the preview is free, the curved file is part of Pro ($4.99 once).

Warming up the preview…

Try a sample:or drop / paste a photo. It stays on your device.

Shape
A gentle arc that stands on its own and spreads the light evenly.
Photos
mm
mm
mm
mm
Fine-tune
Resolution
°

Uses Curved. The flat panel at Standard resolution is free.

Make it a gift $9.99

A printable card with your lithophane glowing on the front and your message inside — tuck it in the box with the print.

Unlock every shape

Your curved lithophaneBuilt in this browser; only the payment goes through Stripe.

Curve angle at a glance

AngleLooks likeGood for
60–90°A gentle bowWindowsills, shelves; a light behind
120°The classic curveFree-standing gifts with an LED puck
150–180°Half a cylinderWrapping around a light; panoramas

The width you set is measured along the curve, so a 120 mm panel at 120° stands about 99 mm wide and 30 mm deep. The size line under the download button always shows the real footprint.

How to make a curved lithophane

  1. Pick a landscape photo. A curve wraps the width, so wide pictures (3:2 or 16:9) look best. Keep faces away from the far edges.
  2. Set the width and curve. 120° is the classic: it stands on its own and every part of the picture faces the light. 60–90° is gentler, 180° almost a half-cylinder.
  3. Check it lit. Turn the model in the preview: the picture stays readable from the front even though it bends.
  4. Print it upright. Same settings as a flat panel; the curve makes it stiff, so no brim is usually needed under 150 mm.

Questions people ask

How do I make a curved lithophane?

Upload a photo above, choose Curved, set the arc length (the width along the curve) and the curve angle, then download the STL. Curved shapes are part of Pro: Pro: $4.99 one-time unlocks curved, lamp shade, heart and night-light shapes, HD resolution and up to 4 photos in one print, for 12 months in this browser.

What curve angle is best?

120° for a free-standing piece with a light behind it. Use 60–90° for a subtle bend in front of a window, and 150–180° to wrap around an LED puck.

Is the picture on the inside or the outside?

The smooth side faces outwards (towards you) and the relief faces the light inside the curve. You see the photo the right way round from the front.

Why does a curved lithophane print better than a flat one?

The curve makes the thin wall stiff, so it does not wobble as it gets taller, and it stands without a frame. It also spreads a single LED more evenly.

Is there a free way to make a curved lithophane?

Yes: 3dp.rocks and ItsLitho both make curved lithophanes for free. Here the flat panel is free and the curve is part of Pro, with a backlit preview that works on a phone.