Lithophanes

Cookie cutter maker

Turn any silhouette or simple drawing into a 3D-printable cookie cutter: the outline is traced, given a thin cutting wall and a flat rim to press on, and saved as an STL in millimetres. Free, in your browser.

Warming up…

Try a shape:Best with a dark silhouette on a light background.

mm
mm
mm
mm
Fine-tune
The shape is
%

Free. Print flat, rim down, in PLA or PETG at 0.2 mm layers; wash by hand.

Getting a clean outline

  • Draw with a thick black marker and fill the shape in; photograph it flat in daylight.
  • Avoid thin necks and sharp inner corners narrower than about 6 mm: dough tears there.
  • If the tool picks the background instead of your shape, open Fine-tune and choose which part is the shape.
  • Holes inside the shape are filled, so a donut becomes a circle. Cut the hole with a small round cutter.

How to make a cookie cutter

  1. Draw or find a silhouette. A dark, filled shape on a light background: a hand drawing photographed in daylight, a clip-art outline, a logo.
  2. Upload it and set the size. Size is the longest side of the cookie. 60–90 mm is a normal cookie.
  3. Check the wall and rim. A 1.2 mm wall cuts cleanly; the 4 mm rim gives your hand something to press on.
  4. Print it rim down. PLA or PETG, 0.2 mm layers, no supports. Wash by hand in warm water.

Questions people ask

How do I make a custom cookie cutter?

Upload a silhouette above, set the size, wall and rim, and download the STL. It is free. Print it flat with the rim on the bed, in PLA or PETG.

What wall thickness should a cookie cutter have?

1.0–1.4 mm. Thinner walls cut sharper but bend; thicker walls are sturdy but squash soft dough. 1.2 mm suits most doughs.

Are 3D printed cookie cutters food safe?

For short contact with dough, PLA and PETG are widely used. Layer lines can trap dough, so wash by hand straight after use and don’t put them in a hot dishwasher. For heavy use, choose a food-contact certified filament.

Can I make a cookie cutter from a photo?

From a photo of a shape with a clear outline, yes — for example a drawing on paper. A busy photo of a person or a pet will not trace well; draw a simple outline of it first.

Can it add inner detail lines?

Not yet: it traces the outer shape and fills any holes. For stamped details, make a separate stamp with the image to STL tool in relief mode.