Heart lithophane maker
A heart lithophane is a heart-shaped photo panel that glows when a light sits behind it. Upload a photo, see the heart backlit in 3D, and download a printable STL with a smooth outline and a solid border. Preview free; the heart STL is part of Pro ($4.99 once).
Warming up the preview…
Try a sample:or drop / paste a photo. It stays on your device.
Fine-tune
Uses Heart. The flat panel at Standard resolution is free.
Make it a gift $9.99
A printable card with your lithophane glowing on the front and your message inside — tuck it in the box with the print.
Print settings
- Filament white PLA (not “natural” or glossy)
- Layer height 0.12 mm (0.1–0.16)
- Infill 100%, or 99% with wall count ≥ 5
- Orientation standing upright, as the file is saved
- Speed 40–60 mm/s outer walls; brim on for tall panels
A smooth edge, not a staircase
Many tools cut a heart out of a square grid, which leaves a stepped edge you can see when the light is on. Here every outline point is placed on the true heart curve before the STL is written, and the border keeps an even width all round — including into the dip between the lobes.
Sizes people print most: 80 mm for a desk, 100 mm for a shelf, 120 mm for a statement piece. Above 120 mm, raise the thickest wall to 3.2 mm so it stays stiff.
How to make a heart lithophane
- Pick a close photo. A heart crops the corners away, so faces should sit in the middle third of the photo. Two faces cheek to cheek fit perfectly.
- Choose Heart and a width. 80–100 mm is the usual gift size. The border follows the heart outline, so the edge stays strong.
- Check it lit. If a face is cut by the lobes, try a tighter photo. The light switch shows how it looks on a shelf by day.
- Print it upright. The point of the heart is the narrowest contact with the bed: add a 5 mm brim.
Questions people ask
How do I make a heart lithophane?
Choose Heart above, upload your photo, set the width, check the backlit preview and download the STL. Pro: $4.99 one-time unlocks curved, lamp shade, heart and night-light shapes, HD resolution and up to 4 photos in one print, for 12 months in this browser.
What photo works best in a heart?
A close photo with the faces centred: the heart keeps the middle and loses the corners. Bright, evenly lit faces give the cleanest glow.
Will the point of the heart break off?
The border runs all the way round at full thickness, so the tip is solid. Print with a brim so the narrow tip stays stuck to the bed.
Can I give it as a gift?
Yes — it is the most popular gift shape. The Gift pack ($9.99) adds a printable card with your heart glowing on the front and your message inside.
Is there a free heart lithophane maker?
Some free tools offer heart shapes, usually by masking a flat panel, which can leave a stepped edge. Here the heart outline is smooth and the preview is free; the heart STL is part of Pro.
An anniversary, a wedding, a pet you miss?
Make the heart