Lithophanes

Lithophane lamp & night light maker

A lithophane lamp is a printed cylinder that shows your photos all the way round when a light glows inside. Make one here from one wide photo or up to four, or a night-light panel that stands on its own foot. Preview is free; lamp and night-light STLs are part of Pro ($4.99 once).

Warming up the preview…

Try a sample:or drop / paste a photo. It stays on your device.

Shape
A cylinder for an LED tea light or puck. Each photo glows as a window; a panorama wraps all round.
Photos
mm
mm
mm
mm
mm
Fine-tune
Resolution

Uses Lamp shade. The flat panel at Standard resolution is free.

Make it a gift $9.99

A printable card with your lithophane glowing on the front and your message inside — tuck it in the box with the print.

Unlock every shape

Your lamp shade lithophaneBuilt in this browser; only the payment goes through Stripe.

A cylindrical lithophane lamp glowing on an oak bedside table, showing a dog
Illustration. Your print shows your own photo.

Sizes that fit common lights

LightShade diameterHeight
LED tea light (38 mm)60–80 mm70–100 mm
LED puck (60–70 mm)80–100 mm90–130 mm
E14 / E12 LED bulb on a base100–140 mm120–180 mm

Give the light at least 10 mm of air all round, and leave the top open.

How to make a lithophane lamp

  1. Add one wide photo, or up to four. Each photo becomes a glowing window on the shade, keeping its proportions; a wide panorama wraps all the way round. Add up to four with the + next to the thumbnail.
  2. Match the diameter to your light. 70–90 mm fits a standard LED tea light or a 60 mm LED puck with room for air. Height 80–120 mm.
  3. Check every side. Drag the preview round: the seam between the last and first photo has a solid bar so it reads as a frame.
  4. Print it upright with a brim. A tall thin cylinder benefits from a 5 mm brim and 40 mm/s outer walls. White PLA, 0.12 mm layers, 100% infill.
  5. Light it with an LED. Warm white, never a flame. For a night light without a lamp base, choose Night light: a flat panel on its own foot.

Questions people ask

How do I make a lithophane lamp from photos?

Choose Lamp shade above, add one wide photo or up to four photos, set the diameter and height for your light, and download the STL. Pro: $4.99 one-time unlocks curved, lamp shade, heart and night-light shapes, HD resolution and up to 4 photos in one print, for 12 months in this browser.

What size lithophane lamp fits a tea light?

An 80 mm diameter, 100 mm tall shade sits comfortably over an LED tea light (about 38 mm across) or a 60 mm LED puck, with space for warm air to leave through the top.

Can I put several photos on one lamp?

Yes, up to four with Pro. They go around the cylinder in equal framed windows, separated by solid bars, so each photo faces a different way.

What is a lithophane night light?

A flat lithophane on a built-in foot that stands by itself in front of a small light. Choose Night light; the foot is 16 mm deep and 10 mm tall.

Is it safe to use a candle?

No. PLA softens around 55 °C. Use an LED tea light, an LED puck or a USB light — they stay cool and look warmer anyway.

Is there a free lithophane lamp maker?

3dp.rocks makes free cylinder lithophanes from one image. Here the lamp shade is part of Pro, with multi-photo frames and a backlit preview; the flat panel is free.